Stationary 1 MPa

Summary

Stationary 1 MPa – embedded electrical heating unit into flange R, SE series (see Accessories)
OKCE 400 S/1MPa, OKCE 500 S/1MPa, OKCE 750 S/1MPa, OKCE 1000 S/1MPa

Stacionary 1 MPa heater: Electric storage water designed for placing on the floor with volumes of 400–1000 litres. The heater is supplied as a separate storage reservoir. The temperature range of heating is 5–74 °C. Different electric heating flange units of the R and SE series from the accessories section may be selected for electric heating. Water heaters of the volume 400 l and 500 l are insulated with hard polyurethane foam with the thickness of 50 mm and provided with white painted steel case. Water heaters of the volume 750 l and 1000 l are insulated with soft polyurethane foam (foam rubber) with the thickness of 100 mm which is supplied separately together with the reservoir.
Main application: Heating of hot service water in premises with the possibility to use low tariffs of electric supply (night tariff).
Accessories: Safety valve

Type	OKCE 400 S/1MPa	OKCE 500 S/1MPa	OKCE 750 S/1MPa	OKCE 1000 S/1MPa
Volume [l]	400	500	750	1000
Weight [kg]	103	121	162	211
Operating vessel pressure [MPa]	1	1	1	1
Max. HUW . temperature [°C]	80	80	80	80
Electrical heating rate from 10 °C to 60 °C	depends on power input of the choosen embedded electrical heating unit R, SE series
Heat loss/energy efficiency category [kWh/24 hod]	2/B	2,3/A	3,6/A	3,9/A

HUW – heat utility water.

Actual page from our catalogue (PDF) – assembly scheme etc. You can download Operational manuals also.