Suspended, vertical

Summary

Suspended, vertical – exchanger surface 0.41 m²	Suspended, vertical – exchanger surface 1 m²
OKC 80 NTR/Z	OKC 100 NTR/Z, OKC 125 NTR/Z, OKC 160 NTR/Z, OKC 200 NTR/Z

Operating position – vertical: Indirect enamelled heater designed for suspension on the wall with volumes between 80–200 litres. The heater doesn't have electric heating.; The heater is connected to the external hot water source with the maximum temperature of 110 °C and pressure of 1 MPa . Heating is assured by a high performance spiral heat exchanger. The heater is equipped with the system of hot utility water temperature regulation (thermostat controlling the three-way valve or circulation pump) for the voltage 230 V/50 Hz, safety valve and circulation outlet.
Most common use: All-year heating of hot utility water using heating water from the gas boiler.

Type	OKC 80 NTR/Z	OKC 100 NTR/Z	OKC 125 NTR/Z	OKC 160 NTR/Z	OKC 200 NTR/Z
Volume [l]	75	95	120	147	195
Weight [kg]	39	56	62	70	87
Heater height [mm]	736	881	1 046	1 235	1300
Heater diameter [mm]	524	524	524	524	584
Heat exchanger surface [m^^2^^]	0,41	1	1	1	1
Vessel max. pressure [MPa]	0,6	0,6	0,6	0,6	0,6
Exchanger max. pressure [MPa]	1	1	1	1	1
HUW . inlet	JS 3/4"	JS 3/4"	JS 3/4"	JS 3/4"	JS 3/4"
Heating water inlet	JS 3/4"	JS 1"	JS 1"	JS 1"	JS 1"
Operating temperature range [°C]	to 80	to 80	to 80	to 80	to 80
Recommended HUW . temperature [°C]	60	60	60	60	60
Electric protection category	IP 45	IP 45	IP 45	IP 45	IP 45
Connection voltage	1 P-EN AC 230 V/50 Hz	1 P-EN AC 230 V/50 Hz	1 P-EN AC 230 V/50 Hz	1 P-EN AC 230 V/50 Hz	1 P-EN AC 230 V/50 Hz
Nominal heat output at heating water temperat. of 80 °C and flow rate 720 l/h [W]	9 000	24 000	24 000	24 000	24 000
Electrical heating rate from 10 °C to 60 °C [min]	32	14	17	23	28
Heat loss [kWh/24 hod]	0,71	0,9	1,1	1,39	1,4

HUW – heat utility water.

Actual page from our catalogue (PDF) – assembly scheme etc. You can download Operational manuals also.